Cutting bright carbon steel with high power cutter -Damon

High power laser cutting

In metal processing, laser cutting carbon steel occupies a very important position, especially through the use of high-power laser cutting, burr-free cutting, bright surface cutting and other leading technology, high-quality precision cutting work pieces can be obtained.

As the thickness of the sheet increases, it is necessary to achieve bright surface cutting not only with the support of high-power lasers but also with advanced cutting technology for parameter adjustment, including nozzle selection and focus position will affect the cutting effect.

The characteristics of carbon steel cutting by 12 kw+ laser:

The carbon steel plate is cut with oxygen and positive focus method. The thicker the carbon steel, the larger the positive focus, the larger the spot on the surface of the material, and the larger the nozzle size is required. (Φ1.0-2.0 mm)

The effect of focus on carbon steel cutting:

Within a certain focus range, the larger the positive focus, the smoother and brighter the carbon steel cutting surface.

The effect of nozzles on carbon steel cutting:

The same focal point, the smaller the nozzle size. The smoother and brighter the carbon steel cutting surface, the smaller the taper.

How to choose the right nozzle and focus:

If you want to achieve stable processing, you must choose to ensure that the nozzle temperature does not get hot and does not continue to rise. Therefore, according to different carbon steel thicknesses, you need to choose a suitable nozzle and focus position. The following is the heating of the nozzle when the MAX 12 kw high-power laser emits light at full power for 30 seconds:

Tips for cutting bright carbon steel thick plates with 12 kw+ laser:

1. With full power and small nozzle cutting, it can cut smooth and small taper products;

2. The biggest problem of 12 kw+ laser cutting carbon steel thick plates is that the nozzle is hot, so the light spot must be strictly adjusted to the nozzle center output;

3. Ensure that the nozzle is not hot. The smaller the nozzle size, the larger the positive focus and the smoother the cut surface.