CO2 laser engraving&cutting machine-Ariel | XTLASER

CO2 laser engraving&cutting machine-Ariel

CO2 laser engraving&cutting machine

This article is about CO2 laser engraving&cutting machine.

 

 

 

 

 

 

CO2 laser engraving and cutting machine is widely used in non-metal materials cutting and engraving.Like wood,plywood, acrylic,cloth, glass and leather ect.

On one hand, CO2 laser cutting machine has a wide range of cutting, which can cut thick metal sheet and high reflective material like aluminum plate. For non-metallic materials like acrylic, wooden materials, PVC materials etc, the cutting thickness could be up to 60 mm. Because of the continuous laser, cutting surface is smooth and of high quality.

On the other hand, the cutting seam of CO2 laser cutting machine is thin. But the speed of cutting thick sheet is very slow.  What’s more, for thin sheet processing, fiber laser of equal power with smooth cutting section cuts 2-3 times faster than CO2 laser. The beam of CO2 laser is divergent and not suitable for large machining

Today we want to share you some common questions about the CO2 laser cutter.Many clients asked us with many times.

– 1. Firstly, maximum engraving & cutting speed;
maximum engraving speed: 0-60000mm/min; cutting speed:0-30000mm/min
– positiong accuracy:
≤±0.01mm

-2. Secondly,resolution ratio;
2500DPI

-3. Thirdly,type of motion system;
Belt+linear rail

– 4.Forthly,drive type:
steppermotor( can change servomotor, need add extra money)

– 5.Fifthly,modification of Ruida control system.
6445

 -6. Sixthly,working table
Our common size is 600*400mm,900*600mm,1200*900mm,1300*900mm,1600*1000mm ect.
-7.Seventhly,Laser power
Our common laser power is 60w,80w,100w,130w,180w ect.
-8.Finally, Machine type
XTE-1325 is the open type while other models are enclosed type.
Any other questions,pls feel free to contact us.
Ariel Liu
Email:xintian122@xtlaser.com
whatsapp:0086 17866940010