Auto focus laser cutting head-Teresa | XTLASER

Auto focus laser cutting head-Teresa

Auto focus laser cutting head

cutting samples

Auto focus laser cutting head

Firstly,Comparison between manual laser cutting head and auto focus laser cutting head.

For manual laser cutting head, the focal length will be different for different thickness materials. With manual laser cutting head, you need to adjust the focus. That means, if you change different thickness of stainless steel to cut, you need to adjust the focus every time. That will waste some time.

And the manual laser cutting head,if cut 5mm and 6mm stainless steel,the cutting time is longer.

For auto-focus laser cutting head,it has a built-in motor drive unit. Which drives the focusing lens through a linear mechanism to change position automatically within 17mm. Customers can set the program to achieve continuous focus. Can complete the rapid piercing and cutting material with different thickness.

The laser cutting head has focus lens inside.  Every focus lens have the focal length. If you find the correct focal length,then the laser power will be the strongest,and the cutting effect will be the best.

For manual laser head,that means,if you change the different thickness of the material,then you need to adjust the height of the laser head to find the correct focal length.And then you need to turn round the focus platform by your hand.

With auto focus laser cutting head, you only need to find the focus  for the first time cutting. Then for any future cutting,the laser head will sense the thickness. And the motor move the laser head to up and down,to adjust the height by electric,not by manual.

Auto focus laser cutting head

Usually if your machine laser power is below 1500w,manual laser head is enough.

From 1500w, we will set one auto focus laser head to customers.That will help you to get a fast cutting.

If you also want a auto focus laser head for 1000w, 750w and 500w. That is also no problem.

Anyone prefer to a greater machine. Only you can undertake the cost. You make the decision.

So if you want to know more,just contact us:


Skype: xtlaser Teresa