How to choose the best speed for laser equipment to cut out high-quality materials-Serena | XTLASER

How to choose the best speed for laser equipment to cut out high-quality materials-Serena

How to choose the best speed for معدات الليزر to cut out high-quality materials

The power of the laser will affect the cutting speed of the معدات الليزر, and the cutting speed of the laser equipment will affect the cutting quality of the plates. Under the condition of a certain laser power, there is an optimal cutting speed range. If the speed is too fast or too slow, it will affect the flatness of the cutting material.

سرعة القطع سريعة للغاية

1. أولاً ، شعاع الليزر والمادة على اتصال ببعضهما البعض لفترة قصيرة ، مما قد يؤدي إلى عدم القدرة على القطع والشرر.

2.Secondly, Some areas can be cut, but some areas cannot.

3. Thirdly,The whole cutting section surface will be delaminated.

4. نتيجة لذلك ، لا يمكن قطع الألواح في الوقت المناسب ، يظهر سطح مقطع القطع حبيبات قطرية ، والجزء السفلي من الألواح سوف يولد خبثًا منصهرًا.

سرعة القطع بطيئة للغاية

1.Firstly, The time of interaction between the material and the laser increases, resulting in over-melting of the cutting plate, and the cutting section surface is rough.

2. ثانيًا ، سوف يتسع الشق وفقًا لذلك ، مما يتسبب في احتراق زائد في الزوايا الأصغر المستديرة أو الحادة ، ولا يمكن الحصول على تأثير القطع المثالي.

3. Moreover,The cutting efficiency is low, which affects the production capacity.

طريقة الحكم على سرعة القطع

1. أولاً ، سرعة القطع مناسبة: انتشار شرارات القطع من أعلى إلى أسفل ، سطح القطع مستقر ، ولا يوجد خبث منصهر في الجزء السفلي ؛

2. The cutting speed is too fast: the cutting spark is inclined;

3. سرعة القطع بطيئة للغاية: شرارات القطع ليست منتشرة وقليلة ، تتكثف معًا.