Features of fiber laser cutting machine–Huda | XTLASER

مميزات آلة القطع بليزر الألياف- الهدى

ميزات آلة القطع بليزر الألياف

 

ميزات آلة القطع بليزر الألياف

firstly. Good cutting quality

Due to the small laser spot, high energy density, and fast cutting speed, laser cutting can obtain good cutting quality.

أ. شق القطع بالليزر ضيق ، وكلا جانبي الشق متوازي ومتعامد مع السطح ، ويمكن أن تصل دقة أبعاد الأجزاء المقطوعة إلى ± 0.05 مم.

b. The cutting surface is smooth and beautiful, the surface roughness is only tens of microns, and even laser cutting can use as the last process,

without mechanical processing, and the parts can use directly.

c. After the material is laser cut, the width of the heat affect zone is very small, the performance of the material near the slit is almost not affect,

and the workpiece deformation is small, the cutting accuracy is high, the geometry of the slit is good, and the cross-sectional shape of the slit is more Regular rectangle.

secondly. High cutting efficiency

Due to the transmission characteristics of the laser, the laser cutting machine is generally equipp with multiple CNC worktables,

and the entire cutting process can be fully CNC controlled. During operation, only need to change the numerical control program,

it can be applied to the cutting of parts of different shapes, both two-dimensional cutting and three-dimensional cutting.

thirdly. Fast cutting speed

Using a laser with a power of 1200W to cut a 2mm thick low carbon steel plate, the cutting speed can reach 600cm/min;

cutting a 5mm thick polypropylene resin board, the cutting speed can reach 1200cm/min. The material does not need to be clamped and fixed during laser cutting,

which can not only save tooling fixtures, but also save auxiliary time for loading and unloading.

forthly. Non-contact cutting During laser cutting, the cutting torch has no contact with the workpiece, and there is no tool wear.

For processing parts of different shapes, there is no need to change the “tool”, just change the output parameters of the laser. The laser cutting process has low noise, small vibration and no pollution.

 

إذا كنت مهتمًا بآلة ألياف الليزر لدينا. من فضلك لا تتردد في الاتصال بنا.

البريد الإلكتروني: xintian132@xtlaser.com

ال WhatsApp: 0086 15264852794

الموقع: www.xtlaser.com