Cutting bright carbon steel with high power cutter -Damon | XTLASER

قطع الفولاذ الكربوني اللامع مع قاطع طاقة عالي - دامون

High power laser cutting

In metal processing, laser cutting carbon steel occupies a very important position, especially through the use of high-power laser cutting, burr-free cutting, bright surface cutting and other leading technology, high-quality precision cutting work pieces can be obtained.

As the thickness of the sheet increases, it is necessary to achieve bright surface cutting not only with the support of high-power lasers but also with advanced cutting technology for parameter adjustment, including nozzle selection and focus position will affect the cutting effect.

خصائص القطع من الصلب الكربوني 12 كو + الليزر:

The carbon steel plate is cut with oxygen and positive focus method. The thicker the carbon steel, the larger the positive focus, the larger the spot on the surface of the material, and the larger the nozzle size is required. (Φ1.0-2.0 mm)

تأثير التركيز على قطع الفولاذ الكربوني:

ضمن نطاق تركيز معين ، كلما كان التركيز الإيجابي أكبر ، كان سطح قطع الفولاذ الكربوني أكثر سلاسة وإشراقًا.

تأثير الفوهات على قطع الفولاذ الكربوني:

نفس النقطة المحورية ، كلما كان حجم الفوهة أصغر. كلما كان سطح قطع الفولاذ الكربوني أكثر سلاسة وإشراقًا ، كان الاستدقاق أصغر.

كيفية اختيار الفوهة المناسبة والتركيز:

If you want to achieve stable processing, you must choose to ensure that the nozzle temperature does not get hot and does not continue to rise. Therefore, according to different carbon steel thicknesses, you need to choose a suitable nozzle and focus position. The following is the heating of the nozzle when the MAX 12 kw high-power laser emits light at full power for 30 seconds:

Tips for cutting bright carbon steel thick plates with 12 كو + الليزر:

1. With full power and small nozzle cutting, it can cut smooth and small taper products;

2. The biggest problem of 12 kw+ laser cutting carbon steel thick plates is that the nozzle is hot, so the light spot must be strictly adjusted to the nozzle center output;

3. Ensure that the nozzle is not hot. The smaller the nozzle size, the larger the positive focus and the smoother the cut surface.