Applications of CO2 Laser Engraving Machine+Ariel
Application of CO2 Laser Engraving Machine
This article is about applications of CO2 laser engraving machine.
We all know that fiber laser is mainly for metal materials. But we also need to mark on non-metal materials,like rubber, glass,wooden ect. So which laser should we choose? Without question, it is CO2 laser. Co2 laser marking technology is widely used on non-metal materials.So if you use to mark on non-metal materials, CO2 laser will be a better choice.
Applicable materials and industrial applications
The CO2 laser marking machine can engrave a variety of non-metallic materials.
Used in garment accessories, pharmaceutical packaging, architectural ceramics, beverage packaging, fabric cutting, rubber products, shell nameplates, craft gifts, electronic components, leather fabrics, bamboo and wood products, label paper and other industries.
Typical application cases, such as laser marking of packaging boxes, paper printing, and printing of metal detonator casings.
Check the water circuit and circuit before turning it on. The boot sequence is:
Firstly, turn on the incoming power and turn on the key switch. At this time, the machine exhaust and the refrigeration system are energizing, and the ammeter shows a value of about 7A;
Secondly, wait 5 to 10 seconds, press the trigger button on the external control panel, the current meter display value is zero, after 3 to 5 seconds, the xenon lamp is ignited, and the ammeter displays the value 7A. (Refer to the laser power supply operating instructions);
Thirdly, turn on the galvanometer power supply;
Fourth, turn on the computer and call up the required marking file;
Fifth, adjust the laser power to the working current (10 ~ 18A), you can start marking;
Any other questions,pls feel free to contact me.
Ariel from XT LASER
WhatsApp&Wechat&Mobile: +86 17866940010
Skype: Ariel XTLaser