5 tips using fiber laser cutting machine

The correct use of fiber laser cutting machine is a great way to extend the life of laser cutting machine. And there are many techniques for fiber laser cutting machine in use. Then let’s talk about the 5 tips using fiber laser cutting machine.
1) Since the dual focal length laser cutting head is a vulnerable part of the laser cutting machine, it cannot work for a long time, which will cause the wear and damage of the laser cutting head.

2) Regularly check the straightness of the fiber laser cutting machine and the verticality of the machine.

Our company usually checks it every six months. If there is any abnormality, please adjust and maintain it in time. If there will errors in irregular inspections, the effect will not very good, affecting the cutting effect, so this link must done.

3) Regularly clean the garbage and dust in the vacuum cleaner weekly.

At the same time, a dust cleaner should be installed.Vacuum the dust and dirt inside the machine with a vacuum cleaner once a week, and all electrical cabinets should be kept strictly dust-proof.
4) The steel strip of the fiber laser cutting machine should always be kept in a tight state, which can reduce the occurrence of safety accidents during the operation of the machine. If the steel strip appears loose, it will lead to the tragedy of death. Therefore, the steel strip looks Looks like a small thing, the problem is still a bit serious.
5) The guide rails of the fiber laser cutting machine should be cleaned regularly to remove dust and other debris. The rack of the equipment should be wiped frequently. Adding lubricating oil, often adding lubricant can make the machine better position, more accurate cutting, and ensure that the work can be performed quickly.
The above briefly describes the 5 major use techniques of fiber laser cutting machine, which are summarized by our company in the experiments. Of course, in your different work situations, the skills and actual work will be different. You can according to your To learn from the situation.