30W fiber laser marking machine for 0.5mm brass cutting-Angelina

30W fiber laser marking machine for 0.5mm brass cutting

 Recently, we got a lot of inquiries about some thin metal cutting with fiber laser marking machine, such as copper, brass, aluminum etc.
In fact,fiber laser marking machine is professional for both metal and non metal materials marking.
It is widely used in automatic parts industry, medical equipment, electronic components, IT industry, hardware industry, precision apparatuses, jewelry, crafts, high-low-voltage applicances, packaging industry, etc.
And for materials marking, the standard 20W laser source is enough.
But if you want to cut metal, we recommend you 30w, 50W,70w or higher.
(Depends on the thickness of your materials. You can tell our engineer about your details requirement, we will offer you the best solution for you)
Yesterday, our engineer use 30W fiber marking machine cut 0.5mm brass.
Now share the pictures for your reference.
Hope you like it.
Our engineer suggest us for less 0.5mm metal cutting, 30W will take around 10mins.
We recommend 50W laser source is better.
If you want to cut more than 0.5mm metal, 70W is more suitable for you.
If you want to cut thicker than 1mm, we recommend fiber laser cutting machine.

Advantage of fiber laser marking machine

1. Great performance: Identical marking quality on both metal and non metal materials with high speed. (up to 0.02mm accurancy and 7000mm/s speed)
2. Long lifetime: Adopt advanced fiber generator, the life time could up to 100,000 hours.
3. Low consumption: It is environment protecting and energy saving, power consumption is reduced by 3-10 tims compared with YAG laser. Using cost is really cheap.
4. Maintenance-free: The machine is maintenance-free, there is almost no any parts need to change after long term using.
5. Easy operation: The machine is very easy to operate, and even the fresh man can use it well.