Application of fiber laser cutter in household industry
This article is about application of fiber laser cutter in household industry.
The applications of stainless steel products in the home appliance industry are mainly washing machine drums, water heater liners, and refrigerator linings.Because stainless steel has excellent durability, strength, and processability. And its appearance is simple , many refrigerators and range hoods .
The traditional stainless steel cutting process has the problems of tool wear, low processing efficiency, and prone to burrs, rough surfaces, and deformation.In contrast, the advantages of the laser cutting process become more prominent and become the common choice of many stainless steel processing enterprises.
Advantages of fiber laser cutting machine
1. No processing stress, no deformation of the workpiece
Fiber laser cutting machine cut the material, the material’s hardness is not affect the effect.This is because of the characteristics of the laser, which is an incomparable advantage of traditional equipment.Laser cutting can cut the steel plate, stainless steel, aluminum alloy, and hard alloy plate without deformation. .
2. No secondary treatment required, high processing efficiency
The laser cutting equipment is apply to process the stainless steel plate.And use the non-contact processing method, which will not affect the deformation of the workpiece, nor will it affect the next process.After the laser cutting process, not require the secondary treatment, and the cutting surface is smooth.
3. Better positioning accuracy and good cutting effect
The laser beam is focus into a small light spot, so that the high power density material at the focal point is quickly heat to the degree of vaporization, and the evaporation form holes. The beam quality is good and the positioning accuracy is better, so the cutting accuracy is also higher.
4. No tool wear and low maintenance cost
In addition,The laser cutting machine cut stainless steel without loss, the photoelectric conversion rate is high, and the processing cost is lower. Besides, the fiber laser cutting machine is maintenance-free.
Among the many laser cutting machine brands, XT LASER is leading in quality and cost-effective.
● The core light source of the equipment is independent production, and the procurement cost is reduce by 15% -20%;
● With ultra-high cutting efficiency, 1mm sheet can cut 600 circular holes with a diameter of 2mm per minute;
● Covers 100% of metal material cutting needs, effectively meets various needs in the processing of home appliances. And helps Chinese home appliance brands move to a higher end.